Page 62 - NG-1 100, NG-1 250, NG-1 500 - Wall-Mounted Nitrogen Generator System Installation Manual

Pressure Transducer Display / Explanation
Display
Description
Setting
SP1 Switching Point 1 (Cut-Out Pressure) Value Range MBA-MBE, Factory Setting MBE
RP1 Resetting Point 1 (Cut-In Pressure) Value Range MBA-MBE, Factory Setting MBE – 10% SP2 Switching Point 2 (Not Used) Value Range MBA-MBE, Factory Setting MBE
RP2 Resetting Point 2 (Not Used) Value Range MBA-MBE, Factory Setting MBE – 10%
MBE MBE-10%
SPRP 5 Sec -
MBA
MBE -
- -
EF Extended Programming Functions Display Pressure Unit - Value Range
Display of Low/High Values in the Display Areas C & E (LoHi) - Value Range SPRP, LoHi Display Update - Value Range 1/2/5/10 per Second Electronically Invert Each Display Field - Value Range YES,NO
Display of Maximum Applied Pressure - Value Range No options
Display of Minimum Applied Pressure - Value Range No options
Reset High and Low Values - Value Range YES,NO
16 Character alphanumeric Measuring Point number - Value Range
Zero Point Offset Correction Max. 5% - Value Range
Display
Description
UNIT Bar,MPA,KPA,PSI,inHG PSI* DISM
OU1 Output 1 Switching Function - Value Range HNO,HNC,FNO,FNC
Rest the parameters to the factory RES settings (Value Range: Yes/No)
DS1 Switching Delay 1 - Value Range 0-50 DR1 Reset Delay 1 - Value Range 0-50
DS2 Switching Delay 2 - Value Range 0-50
Return to Display Mode
END
P-N Outputs Switching Logic - Value Range
PNP/NPN
HNC*
No 0 0
0
PNP
DISU DISR
HIGH
LOW RHL
TAG OSET
Extended Programming Functions
Setting
Display
Description
Setting
DR2
Reset Delay 2 - Value Range 0-50
0
PAS
Password for Display Lock - Password “0000” = No Password Entry Required- Value Range
-
OUA
Analog Output
• I – Output Signal 4-20mA
• INV – Inverted Output Signal 20-4
mA
• U – 0-10V Output Signal
• UINV – Inverted 0-10V Output Signal
• Automatic Detection Depending On
Current Ohmic Load
• AUTO – Non-inverted Output Signals
Value Range I,IINV,U,UINV,AUTO
AUTO
DISC
Color In Display
• OD - Red when Pressure
<SP (Cut-Out), Green when Pressure >SP (Cut- Out)
• DU - Red when Pressure >SP (Cut-Out), Green when Pressure <SP (Cut- Out)
• RED - Always Red
• GRN – Always Green
• OFF – Display Off (Power
Saving)
Value Range OD,DU,RED, GRN,OFF
OD
*
Controller programming functions variations from default settings
TFP1273
Page 61 of 80