Page 64 - NG-1 100, NG-1 250, NG-1 500 - Wall-Mounted Nitrogen Generator System Installation Manual

Filter Replacement Kit Installation Instructions
(Filter Replacement Kit for the Wall-Mount Nitrogen Generators) Kit Contents:
Filter Description
Location
Qty.
5-Micron Coalescing Filter 1-Micron Coalescing Filter .01-Micron Coalescing Filter Water Separator (NG-1 500 Only)
Right Filter Housing 1 Center Filter Housing 1 Left Filter Housing 1 Black Housing 1
NOTE: Before beginning the filter replacement process, ensure all internal components are cool to the touch. Components can be very hot after long run cycles and can present risk of injury.
Replacement Guide:
1. Turn off power to nitrogen generator.
2. Verify that all pressure has been drained from inlet line by examining pressure gauge on nitrogen separation membrane inlet.
TFP1273 Page 63 of 80